Grating Welding - FT Series

DDI-180X2-FT

FT Model

Application | Industrial Construction Industry
  • Grating

Specification:

  1. The machine adopts three phase inverter DC (MFDC) welding system. It draws minimal primary current, and requires dynamic electricity of 100kVa total only.
  2. The German imported Bosch Rexroth inverter DC power supply promises stable welding current, ensuring constant current output.
  3. The machine adopts pneumatic system. No hydraulic unit utilization, with less mechanical issues in the future.
  4. The machine is water cooled to the electrode. This ensures longer electrode life and enhances welding quality.
  5. Controlled by PLC, the machine promises accurate welding distance and movement.
  6. Dahching's profound experience in Electrode-Forged Grating Welding is applied, thus the grating quality is stable.
  7. The machine is equipped with user-friendly interface, which is easy for troubleshooting and is stable in quality.
FT Model DDI-180X2-FT
Thickness of Bearing Bar (A) 3mm ~ 6mm
Height of Bearing Bar (B). 30mm ~ 50mm
Cross Bar (C) 5.0 ~ 6.0 mm (Square Rod) Ø6.0 ~ Ø8.0mm after Twisting
Pitch between Bearing Bars (D) 30mm ~ 50mm
Pitch of Cross Bars (E) 50mm or 100mm
Panel Length 6000mm max.
Panel Width 1000mm max.
Cycle Time 45Min / Grating
  1. Excluding Loading and Unloading by Operator
  2. Panel Size 1000mm*6000mm
  3. Cross bar pitch 100mm
Weldability Weld electrode: 90~120mm max
  1. Cross Bar: 6mm Square Bar (Dia. 8mm after Twisting)
  2. Max 6 Points (3 bearing bars) for 3mm Bearing Bar
  3. Max 4 Points (2 bearing bars) for 5mm Bearing Bar
  4. Cross Bar: 5mm Square Bar (Dia. 6mm after Twisting)
  5. Max 10 Points (5 bearing bars) for 3mm Bearing Bars
  6. Max 8 points (4 bearing bars) for 5mm bearing bars
No. of Cross Bar Welding Welding 2 in 1 stroke

* We reserve the right to modify & improve our products without notice.

Grating Welding Feature
up icon